Herunterladen Inhalt Inhalt Diese Seite drucken

JVC KW-AVX720 Bedienungsanleitung Seite 21

Vorschau ausblenden Andere Handbücher für KW-AVX720:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Menu item
Fader/Balance
Volume Adjust *
1
Subwoofer Level
High Pass Filter
Crossover
Amplifier Gain *
2
1
*
For " DISC/USB": You can make the adjustments separately depending on the audio format—Dolby digital/MPEG
Audio and the others.
*
2
The volume level automatically changes to "VOL 30" if you change to <Low> with the volume level set higher than
"VOL 30."
Fader : Adjust the front and rear speaker output balance.
• When using a two-speaker system, set the fader level to "0."
F6 to R6; Initial 0
Balance : Adjust the left and right speaker output balance.
L6 to R6; Initial 0
5
2
3
Press [
/
/
/
] to adjust.
Fader/Balance
Back
Adjust and store the auto-adjustment volume level for each source, comparing
to the FM volume level. The volume level will automatically increase or decrease
when you change the source.
• <Fix> appears if " TUNER/Bluetooth PHONE" is selected as the source.
–12 to +12; Initial 00
Adjust the subwoofer output level.
–06 to +08; Initial 00
Through
: Select when the subwoofer is not connected.
On
: Select when the subwoofer is connected.
Select the crossover frequency between the front/rear speakers and the
subwoofer.
80Hz, 120Hz, 150Hz
You can change the maximum volume level of this unit.
Off
: Deactivates the built-in amplifier.
Low
: VOL 00 to 30 (Select this if the maximum power of the
speakers is less than 50 W.)
High
: VOL 00 to 50
Selectable setting/item
Fader
Balance 0
Initial: Underlined
Reset
0
AV MENU
21

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis