Cleaning, Changing The Infrared Lamp And Storage - Beurer IL50 Gebrauchsanweisung

6

Cleaning, changing the infrared lamp and storage

Cleaning
Important
Before cleaning the unit, switch it off,
unplug it and allow it to cool down com-
pletely.
Changing the infrared lamp
Remember that a faulty lamp should only
be replaced with a lamp of the same type.
Replacement lamp
Type: Halogen lamp 220-240V/ 300W 118
mm long for R7S socket
Osram
Haloline 64705 – 230 V- R7S
4400 Im
Philips
Plusline Pro Small / 300 T3
Q /CL /P 230 V; 300 W; R7S
Original
Order no. 162.620
Procedure
1. Place the cool unit with the glass
ceramic plate down on a flat sur-
face.
2. Using a suitable crosshead screw-
driver, undo the six screws in the
back panel.
20
Important
Ensure that no water enters the unit!
Do not wash the unit in a dishwasher!
The unit can be cleaned with a damp cloth.
Do not use cleaning agents.
Warning
Danger of an electric shock!
Before changing the lamp, make sure
the power cable is unplugged from the
socket.
Risk of burning on hot surfaces!
Allow the unit to cool completely before
any repairs.
Lamps are not covered by the guaran-
tee.