Cleaning And Disinfection - Beurer Janosch JIH50 Gebrauchsanweisung

8

Cleaning and disinfection

Warning
Observe the following hygiene instructions
in order to avoid any health risks.
• The nebulizer and accessories are in-
tended for multiple use. Please note
that cleaning requirements differ ac-
cording to the different application ar-
eas:
Notes:
• Do not clean the mesh or accessories
with brushes or similar, as this may
cause irreparable damage, and this will
mean that the intended result of the
treatment is no longer guaranteed.
• For additional requirements regarding
the necessary hygienic preparations
(hand washing, handling of medicines
or inhalation solutions) in high-risk
groups (e.g. cystic fibrosis patients),
contact your doctor.
Cleaning
The mesh atomiser and container, as well
as accessories such as mouthpiece, mask,
connecting piece, etc. must be cleaned
with hot water after each use. Carefully dry
all components using a soft cloth. Once all
components are fully dry, gather them to-
gether and place them in a dry, sealed
container, or continue with disinfection.
• Remove the mouthpiece and any ac-
cessories from the atomiser.
• Add 6 ml of clean water to the medicine
container (2) and switch on the device
to remove any medicine residue from
the mesh first. (Please spray the entire
liquid).
• Remove the batteries.
• Remove the detachable parts from the
device, e.g. mesh atomiser or medicine
container and cover.
Disassembly
• To continue with cleaning its individual
components, disassemble the atomiser
(2, 3):
• Remove the medicine container (2) and
mesh atomiser (3) by pressing both
brackets inwards and drawing the unit
out.
• Remove the mesh atomiser (3) from the
medicine container (2) by turning it anti-
clockwise and drawing it out.
• The nebuliser is later reassembled in
the reverse order.
29