Beurer IL50 Gebrauchsanweisung Seite 21

3. Place the body so that the front of
the glass ceramic plate is lying on
the flat surface.
4. Take the cool lamp by the left or right end and press it carefully to the right or left.
5. Now lift it forwards and out of the socket.
Note
Use a cloth to hold the new lamp when inserting it, not bare fingers, as the grease on
your skin could damage the coating on the lamp.
6. Insert the new lamp in the socket. The new lamp is inserted in the reverse order to
removal.
7. Close the unit again. The unit is closed in the reverse order to opening it.
Make sure that no foreign objects are left in the body of the unit and that no
cables become trapped..
Storage
Remove the mains plug and let the unit
cool down completely before you move it.
If possible, store the infrared radiant heater
in its original packaging in a dry place.
21