Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.13 Playing a continuous loop
A section within a title can be repeated as a seamless continuous loop as many times as desired. This loop
can be overwritten at any time and is deleted when selecting another title, changing the CD or storage
medium, or switching the unit off and on again.
1
• Setting the starting point "on the fly": In play mode, shortly actuate the button IN (LED lights blue)
when the desired starting point of the loop is reached. Playback is not interrupted.
the display.
• Setting the starting point precisely: To set the starting point precisely to 1 frame (1/75 second) set
the unit to pause and use the rotary wheel to go to the exact spot (the function fast forward/reverse
must be deactivated). The current spot is constantly repeated. Shortly actuate the button IN to set the
starting point.
2
• Setting the end point "on the fly": In play mode, shortly actuate the button OUT when the desired
end point of the loop is reached. The section between the starting point and the end point of the loop is
continuously repeated. The LEDs of the buttons IN and OUT will be flashing and
display.
• Setting the end point precisely: To set the end point precisely to 1 frame (1/75 second) set the unit
to pause and use the rotary wheel to go to the exact spot (the function fast forward/reverse must be
deactivated). The current spot is constantly repeated. Shortly actuate the button OUT to set the end
point. The section between the starting point and the end point of the loop is continuously repeated.
3
To exit the loop and to continue the title, press the button OUT. The LEDs of the buttons IN and OUT will
stop flashing but will remain on to indicate that a loop has been memorized and is ready to be engaged.
By selecting another title it is also possible to exit the loop.
4
To restart the loop, press the button RELOOP. The buttons IN and OUT will be flashing again.
5
To program another loop, redefine the starting and the end point with the button IN and OUT.
6.14 Selecting repeat functions
With the button REPEAT two different repeat functions can be selected:
• first actuation of the button: continuous repeat of the selected title (indication "REPEAT 1")
• second actuation of the button: continuous repeat of all titles of the CD (indication "REPEAT ALL")
• third actuation of the button: return to normal play
6.15 Programming an individual title sequence
For playing selected titles in a certain order, an individual title sequence with up to 20 titles can be
programmed. This sequence will be deleted by ejecting the CD or switching the unit off and on again.
1
In pause mode, press the button PGM on the player or PROGRAM on the remote control to activate the
programming mode. The display indicates "PROGRAM" and the first memory location number P-01.
2
Use the buttons
sequence. In programming mode, the folder navigation is deactivated. The title name is not indicated.
3
After the title selection, press the button PGM on the player or PROGRAM on the remote control to
confirm the selection. The display will show the second memory location number P-02.
4
Proceed in the same way for all further titles until the title sequence has been programmed.
5
To start the playback of the title sequence, press the button
location number P-01. The title name is not indicated.
6
To add further titles to the title sequence, follow steps 1 to 5.
7
To delete the title sequence and to continue normal play, press the button
and keep the button PGM on the player or PROGRAM on the remote control pressed until the insertion
"PROGRAM" will be extinguished.
and
or the control FOLDER/TRACK SEARCH to select the first title for the title
. The display will show the first memory
31/32
is indicated on
is indicated on the
to switch to pause mode
00047148.DOC, Version 1.0
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
