GRAUPNER OPTO-AUTO-PILOT Bedienungsanleitung Seite 16

Dimensions of the sensor approx.
32 mm
Weight approx.
Appendix:
If you are using a Graupner JR receiver the projecting lug on one
side of the Auto-Control-Board (ACB) connectors must be removed
using a file or a sharp knife.
Remove lug
No lug
Important note regarding installation of the Auto-Control-Board
(ACB) with iFS systems
The Auto-Control-Board (ACB) must be positioned in the model's
fuselage at least 100 mm away from the iFS module.
CE Please do not dispose of the Opto-Auto-Pilot in the ordinary
domestic waste!
Environmental Protection Notes
The presence of this symbol on a product, in the user instructions or
the packaging, means that you must not dispose of that item, or the
electronic components contained within it, in the ordinary domestic
waste when the product comes to the end of its useful life. The
correct method of disposal is to take it to your local collection point
for recycling electrical and electronic equipment.
Individual markings indicate which materials can be recycled and re-
used. You can make an important contribution to the protection of
our shared environment by re-using the product, recycling the basic
materials or re-processing redundant equipment in other ways.
If you don't know the location of your nearest disposal centre, please
enquire at your local council office.
Graupner GmbH & Co. KG, Henriettenstr. 94 - 96, D-73230
Kirchheim/Teck, Germany, guarantees this product for 24 months
from the initial date of purchase. The guarantee applies only to
material faults or functional defects which are present at time of
purchase of the product. The guarantee does not cover damage due
to wear, overloading, use of inappropriate accessories or
incompetent handling. The user's statutory rights and warranty claim
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler! Id.-Nr. 0059780
16
34 x
28 g
08/2008