WolfVision VZ-C32 Bedienungsanleitung Seite 16

The following chapter is for experienced users only:
ON-SCREEN MENU / ON-SCREEN HELP
For regular use of the WolfVision Visualizer, it is not necessary to go into the Visualizer's
menu and change settings. Inexperienced users should not make any adjustments here.
To enter the on-screen menu press the MENU key (#40) for one second. Settings of the
Visualizer's basic functions and the built-in camera can be made here using the 4 SELECT
keys on the remote control (=the numerical keys with red arrows - #37).
Please note that some basic settings in the menu can only be changed if you set the menu
item "Format protect" to "OFF" first.
If more information on a function in the on-screen menu is required, set the cursor in the
respective line and press the HELP key (#38, this is a double function of the Number 5 key).
A detailed description of this function appears on the screen. If you want to reset the
selected item to the default setting, press the HELP key (#38) for 2 seconds.
By pressing the MENU key for 4 seconds the Extra Menu appears.
In the Extra Menu, settings like baud rate can be changed.
The functions of the on-screen menu are not described in detail in this user manual as the
help menu is an integrated part of the Visualizer's software (firmware). The information you
see on your screen always belongs to the current Visualizer firmware.
Switching to Negative, Negative/Blue and Black/White
The output image of the Visualizers can be switched from positive to negative in the on-
screen menu. In addition, the background of a negative image can be switched to blue for
better readability of text. You can also switch between color or black and white in the on-
screen menu.
TIP: If you often switch to negative, negative/blue or black/white images you can assign this
function to one of the Preset keys in the on-screen menu.
Changing the Standard Contrast (Color) Settings
If the picture or the colors on your screen appear to be too dark, you can lower the overall
contrast of the picture in the "Color Settings" menu of the on-screen menu. The settings can
be made separately for the normal mode and the text-mode.
Auto Power-off
In the "Power Control" settings of the on-screen menu you can select that the Visualizer will
be automatically switched off after a certain amount time.
Preset Settings
In the "Preset Settings" the Preset keys can be assigned specific functions such as
"Negative/Blue", Black/White", etc.
RESET OF ON-SCREEN MENU SETTINGS
All settings in the on-screen menu can be set back to the factory defaults. "Reset" is one
item in the on-screen menu.
If you only want to reset the item that is currently selected to the default setting, press the
HELP key (#38) for 2 seconds!
15