Technical Data; Noise Information - Bosch PPS 7S Originalbetriebsanleitung

OBJ_BUCH-1259-002.book Page 41 Wednesday, March 30, 2011 11:02 AM
31 Guide rail for the universal guide
32 Detent override for adjustment of mitre
angles
33 Wing bolt for locking mitre angles
34 Wing bolt for locking the fence 36
35 Angle stop with scale for mitre angles
36 Fence on the universal guide
37 Wing bolt for locking the guide rail 31
38 Rotary knob for locking the universal guide
39 Bottom plate
40 Battery lid
41 Laser unit
42 Fastening kit for "laser unit"
43 Fastening kit for "blade guard"
44 Laser on/off switch (for marking of cutting
line)
45 Fastening screw for laser housing
46 Laser housing
47 Thumbwheel for positioning of laser
(flush alignment)
48 Fastening kit for "table extension"
49 Support leg of the table extension
50 Allen screws of the upper fastening plate for
support leg 49
51 Rotary knob for fine adjustment of the table-
extension height
52 Rotary knob for locking the table extension
53 Support tongue for the fence 36
54 Lower saw blade cover
55 Cleaning flap of the lower saw blade cover
56 Spindle lock
57 Allen screw (size 6 mm) for mounting of saw
blade
58 Exterior clamping flange
59 Interior clamping flange
60 Screws for fastening of the riving knife
Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools

Technical Data

Pull Push Saw
Article number
Rated power input
No-load speed
Reduced starting
current
Constant electronic
control
Laser type
Laser class
Weight according to
EPTA-Procedure
01/2003
Protection class
Maximum workpiece dimensions, see page 49.
The values given are valid for a nominal voltage [U] of
230 V. For different voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Tooth thickness/setting, min.
Mounting hole diameter

Noise Information

Measured sound values determined according
to EN 61029.
Typically the A-weighted noise levels of the
product are: Sound pressure level 97 dB(A);
Sound power level 110 dB(A). Uncertainty
K =3 dB.
Wear hearing protection!
1 609 929 W71 | (30.3.11)
English | 41
PPS 7S
3 603 M03 3..
W 1400
-1
min 4800
nm 650
mW < 0.39
1M
kg 23.2
/II
mm 190
mm 1.6–2.0
mm 2.6
mm 30