Base Station Settings; Base Station Ringing Tone; Flash (Recall) Time - switel BDT 650 duo Bedienungsanleitung

10

Base Station Settings

10.1

Base station ringing tone

Different ringing melodies and volume settings can be set on the base station. Five
different ringing melodies are available for the base station.
10.1.1 Base station ringing melodies
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Select the ringing melody required. There are 5 different melodies available for
selection.
Note: The different melodies are played back during the selection process.
4. Confirm by pressing the
in future.
10.1.2 Base station volume
The handset can be used to set the base station volume to one of five different levels or to
switch the volume off.
highest.
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Set the required volume or switch off the ringing function.
4. Confirm by pressing the
10.2

Flash (Recall) time

As already mentioned in Chapter 8, various Flash times are available for selection. The
%
button can be assigned the following Flash times:
80 ms (
FLASH : 1
600 ms (
FLASH : 5
1. Press the Menu button
menu. Confirm by pressing the
2. Select the
3. Select the Flash time required.
4. Confirm by pressing the
- Base Station Settings -
"
menu and confirm by pressing the
RING MELODY
"
is the lowest volume which can be set and
VOLUME: 1
"
menu and confirm by pressing the
RING VOL
"
), 100 ms (
FLASH : 2
)
"
menu and confirm with the
RECALL
"
(
and use the
"
button.
button. The base station rings with the set melody
(
and use the
"
button.
button.
), 180 ms (
FLASH : 3
(
and use the
"
button.
button.
)
or button to select the
"
button.
)
or button to select the
"
button.
), 300 ms (
FLASH : 4
)
or button to select the
"
button.
BASE
the
VOLUME: 5
BASE
),
BASE
145