Redialling Button; Displaying The Call Timer; Changing Or Deactivating The Ringing Melody Volume When A Call Is Received; Adjusting The Receiver Volume During A Call - switel BDT 650 duo Bedienungsanleitung

5.8

Redialling button

Redialling is used when the phone number called was engaged or not answered. The
telephone stores the last ten phone numbers dialled.
1. Press the
2. Press the
redialling list.
3. Press the Call button
redialled.
Note: If the phone number is also stored in the phone book, the name and not the
number automatically appears in the display. Press the
between the display of the name and phone number of the respective entry. If
the phone number stored is longer than 12 digits, press the
the missing digits of the phone number.
5.9

Displaying the call timer

The duration of a call is displayed in minutes and seconds during the call.
The call duration appears in the display 15 seconds after pressing the Call button
replacing the phone number dialled. When the call is ended, the timer remains in the
display for 5 seconds.
5.10 Changing or deactivating the ringing melody volume when a call
is received
When a call is received, it is possible to adjust the volume of the ringing melody louder or
quieter, or to switch it off completely.
(
Press the or
setting appears in the display. Select between
ringing melody off (
5.11

Adjusting the receiver volume during a call

The volume of the receiver (handset loudspeaker) can be adjusted according to
requirements.
(
Press the or
The volume level currently set appears in the display.
the highest volume setting.
EAR VOL5
- Operation -
(
button. The last number dialled appears in the display.
( )
or to scroll through and select a phone number from the
!
. The phone number displayed is automatically
)
buttons when the incoming call is received. The current volume
).
VOL OFF
)
buttons during a call to adjust the volume to one of five levels.
to
VOLUME : 1 VOLUME : 5
EAR VOL1
"
button to switch
"
button to display
!
or switch the
is the lowest and
,
133