Faults And Troubleshooting - CARDIOSTRONG Ergometer BX70i Betriebsanleitung

+ Check the tightness of all screw connections once a month.
+ In order to be able to guarantee the constructively defined safety level of this
equipment, we recommend having the equipment regularly maintained (at least
once a year) by specialists (service technicians of your contract partner).
+ The equipment may be cleaned of dust, dirt and sweat using a damp cloth. The
use of solvents should be strictly avoided. Also, make sure that no liquids (e. g.
sweat) get into the openings of the equipment (e. g. console).
2.2

Faults and Troubleshooting

The equipment runs through regular quality controls during production. Nevertheless,
errors or malfunctions on the equipment may occur. Individual parts are often the
cause of faults and replacement is usually sufficient. Please use the following overview
to see the five most common errors and how to repair them. If the equipment still
does not work properly, please contact your contract partner.
Error
Cracking near the
pedal
Equipment wobbles
Handlebar/saddle
wobbles
Display does not turn
on
No pulse reading
10
Cause
Loose pedals
Equipment is not level
Screws are loose
Power supply disrupted
• Sources of interference
in the room
• Using a chest strap:
- Unsuitable chest strap
- Chest strap is
incorrectly positioned
- Empty batteries
Repair
Tighten the pedals
Adjust the supporting feet
Tighten screws
Check all screw connections
and see if the plug is plugged
in
• Eliminate sources of
interference (e. g. mobile
phone, loudspeaker, etc.)
• Use a suitable chest strap (see
recommended accessories)
• Reposition the chest
strap and/or moisten the
electrodes
• Change the batteries
BX70i