Menu Settings - Yamaha DPX-530 Bedienungsanleitung

◆ Menu settings

Set the following items on their relevant menus.
1. IMAGE menu
TV60
IMAGE
CONTRAST 0
BRIGHTNESS 0
WHITE ENHANCE DEFAULT
sRGB OFF
COLOR TEMP. MID
SATURATION 0
HUE 0
SHARPNESS 0
GAMMA DEFAULT
1. IMAGE menu
ITEM SETTING
CONTRAST 0 – 60
BRIGHTNESS ±30
WHITE ENHANCE DEFAULT
0 – 10
sRGB ON / OFF
COLOR TEMP. HIGH
MID
LOW
CUSTOM
SATURATION 0 – 20
HUE ±10
SHARPNESS 0 – 10
GAMMA DEFAULT
DYNAMIC
CINEMA1
CINEMA2
2.SETUP menu
TV60
SETUP
KEYSTONE 0
AUTO POWER
OFF
ON
AUTO POWER
OFF
OFF
SPLASH
ON
SCREEN
HIDE SCREEN
BLUE
COLOR
LAMP MODE BRIGHT
LOCATION FRONT/TABLE
FUNCTION
Use to adjust the contrast of the projected image (see page 24).
Use to adjust the brightness of the projected image (see page 24).
The appropriate white enhance value is automatically selected depending on the input signal.
Select DEFAULT for normal use.
Use to adjust the white level of the projected image (see page 24).
Select whether or not to project emphasizing on the color reproducibility.
Select for a high color temperature (see page 25).
Select for a balanced color temperature (see page 25)
Select for a low color temperature (see page 25)
Use to customize the color temperature (see page 25)
Use to adjust the color richness of the projected image (see page 24).
Use to adjust the color tint of the projected image (see page 24).
Use to adjust the sharpness of the projected image (see page 24).
The appropriate gamma mode is automatically selected depending on the input signal. Select
DEFAULT for normal use.
Select to secure the contrast even when the room lighting is increased to some extent.
Select when watching movies in dim lighting as in a theater.
Select to gain the halftone to make the skin color more vibrant even in a dark scene. This
mode is suitable for TV viewing.
3.INITIAL menu
TV60
INITIAL
MENU POSITION UPPER LEFT
PROGRESSIVE
AUTO
MODE
COLOR SYSTEM AUTO
ASPECT DEFAULT
LANGUAGE ENGLISH
RESET ALL EXECUTE
4.SIGNAL menu
TV60
SIGNAL
HORIZ. POSITION 78
VERT. POSITON 22
PHASE 0
TRACKING 0
D-SUB INPUT RGB
SET UP LEVEL 7.5%
SYNC NOISE
OFF
MASK
A/D SETTING EXECUTE
21