Connection Of Cinch Outputs, Remote Control And Antenna - Conrad tu 1000 Bedienungsanleitung

Connection of cinch outputs, remote control and antenna

For the connection of the cinch sockets only use the cinch wires provided or other suitably
isolated cinch wires. The use of other cables may lead to interference. To avoid distortion or
mismatching which could damage the device, only devices with cinch outputs may be
connected to cinch inputs.
Use the enclosed remote wires for connection of remote control elements
The white cinch socket is to be connected with the left cinch connection of the amplifier.
The red cinch socket is to be connected with the right cinch connection of the amplifier.
• Connect the connection OUTPUT to the TUNER input on your amplifier.
• If you're using the HiFi amplifier A-1000, connect the remote control input REMOTE SYSTEM TO AMP with the
corresponding control socket REMOTE SYSTEM TUNER on the amplifier. You can the control the tuner with the
system remote control.
24
Operating Instructions

English