Control Through System Remote; Handling - Conrad tu 1000 Bedienungsanleitung

Control through system remote

The remote control sold together with the HiFi amplifier A-1000 allows you to operate all main functions of the tuner
and further devices of the Renkforce HiFi series from the comfort of your armchair.
The remote control has the following buttons:
• BAND
The button switches between AM and FM frequencies.(same function as the BAND (6) button on the device itself).
• MEMO SCAN
This button plays the stations saved to the tuner's memory for a short while before moving on to the next saved
station.
• MEMO HOLD
This button stops the MEMO SCAN search. The last station played is then held and play continues from this
station.

Handling

• Never plug the power plug into a mains socket immediately after the device was taken from a cold to a warm
environment. The condensation water created thereby may damage the device.
Allow the device to reach room temperature before connecting it. Wait until the condensation water has
evaporated.
• Never pull the mains plug by pulling the cable from the socket. Always only use the thus provided grip area.
• Remove the mains plug from the electrical outlet if the device is not in use for a longer period of time.
• For safety reasons always pull the mains plug from the socket during a thunderstorm.
• Do not listen to excessively loud music for long periods of time. This may damage your hearing.
30
Operating Instructions

English