Before Operation - Aiwa AV-D58 Bedienungsanleitung

BEFORE OPERATION

To turn the unit on
Press POWER 6 6 6 6 6 STANDBY/ON.
Operation is possible after four seconds. The VOL (volume) level
or function name is displayed one after the other for the first four
seconds.
The selected function indicator lights up in red.
To change the brightness level of the display
1 Press ECO repeatedly until "DIM MODE" is displayed.
2 Within 4 seconds, press ENTER.
3 Within 4 seconds, turn MULTI JOG to select the dimmer mode
as below.
The mode will be automatically set after 4 seconds. It will also
be set if ENTER is pressed within 4 seconds after step 3.
-
DIM-OFF: The normal display.
DIMMER 1: The illumination of the display is dimmer than
usual.
DIMMER 2: The illumination of the display is dimmer than
DIMMER 1. The function indicator turns off.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo
plug (ø6.3 mm, 1/4 inch). Be sure to set FRONT SPEAKERS to
hOFF. Otherwise sound is output from the speakers.
NOTE
When the headphones are plugged in:
- The Dolby Pro Logic or DSP system is automatically canceled.
- The Dolby Digital or DTS surround mode is changed to
"2chSTEREO (2CH DOWNMIX)".
To turn the unit off, press POWER 6STANDBY/ON.
8
ENGLISH
POWER ECONOMIZING (ECO) MODE
Setting this unit to ECO mode reduces power consumption in
standby mode.
Initial setting of ECO mode is ON.
• When the current time is set, the clock display disappears
immediately.
• While the power is off, all the display lights turn off, and only
the ECO indicator lights in red.
To cancel ECO mode
1 Press ECO to display "ECO MODE" while the unit is turned
on.
2 Within 4 seconds, press ENTER.
3 Within 4 seconds, turn MULTI JOG to select "ECO OFF".
The mode will be automatically set after 4 seconds. It will also
be set if ENTER is pressed within 4 seconds after step 3.