Dolby Surround And Dts Surround; Selecting Dolby Surround - Aiwa AV-D58 Bedienungsanleitung

DOLBY SURROUND AND DTS SURROUND

DOLBY SURROUND
This unit is equipped with the Dolby Pro Logic decoder, Dolby
Digital decoder and DTS decorder.
The unit and the center and surround speakers (standard) assure
full-scale home theater sound. When playing back discs or video
software that have been recorded in Dolby Pro Logic, Dolby Digital
or DTS surround, astonishingly realistic sound surrounds the
listener to create a new level of audio/visual entertainment.
Independent control of the five channels allows the listener to
enjoy the same type of sound reproduction experienced in movie
theaters. Voices are reproduced in the front and center sound
field, while ambient sounds like cars and crowds are reproduced
on all sides of the listener for an incredibly lifelike audio/video
experience. Please read the following carefully to "tune" the
system's output to match the characteristics of your listening
space.
Check the following:
• Before enjoying Dolby or DTS surround sound, adjust the
speaker sound levels to the proper balance (see page 19).
• Make sure the speakers are properly connected and positioned
(see pages 5 and 6).
• Make sure the TV set and video unit are properly connected
(see page 4).
• Make sure the disc and video tape, etc., support Dolby Pro
Logic, Dolby Digital or DTS surround.

SELECTING DOLBY SURROUND

The optimal Dolby Digital surround and Dolby Pro Logic modes
and settings depend on the type and placement of the speakers.
Check the current type and placement of your speakers and select
the recommended mode accordingly.
Recommended mode
[Dolby Digital Surround]
Larger-size
Surround speaker DOLBY
(Rear speaker)
D-WIDE
No surround 3 STEREO-
speaker
WIDE
[Dolby Pro Logic]
Larger-size
Surround speaker PRO LOGIC-
WIDE
(Rear speaker)
No surround 3 STEREO-
WIDE
speaker
PHANTOM mode: Select this mode when the center speaker is
not connected. All center channel signals are redistributed to the
left and right channel speakers.
3 STEREO mode: Select this mode when the surround speakers
are not connected.
18
ENGLISH
Center speaker
Smaller-size No speaker
DOLBY PHANTOM
D-NORMAL
3 STEREO-
2chSTEREO
NORMAL
Center speaker
Smaller-size No speaker
PRO LOGIC- PHANTOM
NORMAL
3 STEREO-
–
NORMAL
TO SELECT DOLBY SURROUND MODE
Preparations
• When selecting Dolby Digital surround mode, select the VIDEO
1 (DIGITAL) or VIDEO 2 (DIGITAL) function (see page 13) and
play a disc recorded in Dolby Digital surround before
selecting the mode.
• When selecting Dolby Pro Logic mode, select the function
except VIDEO 1 (DIGITAL) and VIDEO 2 (DIGITAL).
1 Press SURROUND and turn MULTI JOG to select
the appropriate mode.
The selected mode name appears on the display.
[Dolby Digital Surround]
DOLBY D PHANTOM
To select 2chSTEREO mode, press SURROUND repeatedly
until "2chSTEREO" appears.
NOTE
Select Dolby Digital surround mode while playing a source
recorded in Dolby Digital surround.
[Dolby Pro Logic]
PRO LOGIC PHANTOM
3 STEREO
3 STEREO