Reception By Preset Number - Aiwa AV-D58 Bedienungsanleitung

To search for a station quickly with N
tuning)
Keep one of the buttons pressed until the tuner starts searching
for a station. The search stops when the tuner tunes in to a staiton.
To stop the Auto Search manually, press one of the buttons.
When operating with the remote control, keep TUNING UP or
DOWN pressed while pressing SHIFT.
• The Auto Search may not stop at stations with very weak signals.
N / M N N M M (Auto Search M
N M

RECEPTION BY PRESET NUMBER

1 Select a band.
2 Turn MULTI JOG to select a preset number.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
ENTER , and press ENTER again within four seconds.
The preset numbers of all stations in the band with higher
numbers are also decreased by one.
When using the remote control
Select a band, then press the numbered buttons to select a preset
number.
Example:
To select preset number 25, press 2 and 5.
To select preset number 7, press 7.
To tune in to a station which is not preset
Turn FUNCTION to select TUNER, and press BAND/DIGITAL/
ANALOG repeatedly to select a band. And then press N / M
to select the station (Manual tuning).
When an FM stereo broadcast contains noise
Press MONO TUNER while pressing SHIFT on the remote control
so that "MONO" appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, repeat the above so that "STEREO"
appears.
When the reception contains noise interference
Move the unit away from other electrical appliances, especially
digital audio devices, or turn off the appliances that generate
noise signals.
NOTE
RDS functions may not work correctly if the RDS transmission
data from the station contains too much interference or the
reception signal is too weak.
En
15
ENGLISH