Radio Reception; Presetting Stations - Aiwa AV-D58 Bedienungsanleitung

RADIO RECEPTION

PRESETTING STATIONS

The unit can store a total of 32 preset stations. Presetting allows
you to tune in to a station directly. Stations are assigned preset
numbers, beginning from 1 in consecutive order for each band
(FM, MW, LW).
Automatic presetting:
This unit has a function for reception of *
System) and other stations.
FM RDS stations take priority over other FM stations if there are
more than 32 receivable stations.
Manual presetting with Manual tuning or Auto Search
tuning:
You can select stations to be preset from all the bands.
AUTOMATIC PRESETTING
The tuner scans through the receivable frequency range and
stores stations automatically.
1 Turn FUNCTION to select TUNER.
2 Keep RT pressed for three seconds until "AUTO
PRESET" is displayed.
3 Press ENTER while "AUTO PRESET" is displayed.
The tuner searches for a station, beginning with the FM band.
When tuning in to a station, the tuner displays the frequency
of the tuned station for two seconds and stores it.
Stations with weak signals may not be stored.
The search continues on the MW and LW bands if preset
numbers are still available.
When automatic presetting has been completed, the display
returns to the first preset station.
When the tuner detects *
alternative frequencies
Only the station with the stronger signal is stored.
Before storing an RDS station, the tuner checks first whether
the same stations on the other frequencies are present, and
stores the station with the best reception.
NOTE
When automatic presetting is done, all previously stored stations
are cleared.
14
ENGLISH
1 RDS (Radio Data
2 identical RDS stations with
MANUAL PRESETTING
1 Turn FUNCTION to select TUNER, and press
BAND/DIGITAL/ANALOG repeatedly to select a
band.
FM
N N M M
2 Press N N N / M M M to select a station (Manual tuning).
Each time the button is pressed, the frequency changes.
a When tuning in to an FM RDS station
After "TUNE" on the display goes out, the Program
Service station name (*
indicator lights up.
b When tuning in to the other stations
After "TUNE" on the display goes out, the band is
displayed.
• During FM stereo reception, 1 lights.
3 Press ENTER to store the station.
The selected preset number appears.
4 Repeat steps 1 to 3 to store the stations.
The next station will not be stored if a total of 32 preset stations
for all bands have already been stored.
When operating with the remote control
Press TUNER/BAND while pressing SHIFT in step 1, and
TUNING DOWN or UP while pressing SHIFT in step 2.
MW LW
3 PS) is displayed and the RDS