Connecting A Tv - Yamaha HTY-7030 Bedienungsanleitung

Connections

Connecting a TV

For audio connection, connect the analog audio output jacks on your TV to the TV/STB AUDIO INPUT jacks on this
unit. If your TV has an optical digital output jack, connect the optical digital output jack on your TV to the TV/STB
OPTICAL DIGITAL INPUT jack on this unit.
For video connection, connect the video input jack on your TV to the VIDEO OUT jack on this unit to display the OSD
for easy viewing when you adjust the system parameters in SET MENU.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 20).
Notes
• If you make analog and optical digital audio connections at the same time as shown in the illustration below, the digital audio signals
input at the TV/STB OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the TV/STB AUDIO
INPUT jacks.
• Even if you connect your TV and this unit via the HDMI jack, you need to connect the video input jack on your TV to the VIDEO
OUT jack on this unit in order to display the OSD of this unit.
ANTENNA
DOCK
OSD video pin cable
22
En
AUDIO INPUT OUT
VIDEO
AUX 1 TV/STB SUBWOOFER
R L
Analog
audio
output
Video
(U.S.A. and Canada models)
DIGITAL INPUT
AUX 2 DVD
COAXIAL
OPTICAL
AUX 1 TV/STB
Video
Optical
input
digital
output
TV
Audio pin cable
Optical cable
Rear panel of this unit
XM IR IN
Audio