Herunterladen Diese Seite drucken
Yamaha HS-Serie Bedienungsanleitung

Yamaha HS-Serie Bedienungsanleitung

Powered monitor speaker/subwoofer
Vorschau ausblenden Andere Handbücher für HS-Serie:


Powered Near-field Reference Monitors & Subwoofer



Inhaltszusammenfassung für Yamaha HS-Serie

  • Seite 1 Powered Near-field Reference Monitors & Subwoofer OWNER’S MANUAL BEDIENUNGSANLEITUNG MODE D’EMPLOI MANUAL DE INSTRUCCIONES 取扱説明書...
  • Seite 2: Explanation Of Graphical Symbols

    N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. • This applies only to products distributed by Yamaha-Kemble Music (U.K.) Ltd.(3 wires)
  • Seite 3 Bitte bewahren Sie diese Bedienungsanleitung zum späteren Nachschlagen an einem sicheren Or t auf. Nous vous remercions d’avoir choisi un haut-parleur de contrôle ou un caisson de basses amplifié YAMAHA. Pour obtenir les performances optimales de vos haut-parleurs et garantir une longévité maximale, lisez attentivement ce mode d’emploi avant d’utiliser le haut-parleur de contrôle ou le caisson de basses amplifié.
  • Seite 4 • Company names and product names used in this Owner’s Manual are trademarks or registered trademarks of their respective owners. • Specifications and descriptions in this owner’s manual are for information purposes only. Yamaha Corp. reserves the right to change or modify products or specifications at any time without prior notice. Since specifications, equipment or options may not be the same in every locale, please check with your Yamaha dealer.
  • Seite 5: Getting Connected

    Unlike most other audio and production gear, the way speakers are set up in a room has a dramatic effect on the final sound. This short tutorial provides a basic guide to help you maximize the performance of your Yamaha HS-series monitor speakers.
  • Seite 6 If you’re connecting your HS speakers directly to a mixer such as one of the Yamaha MG-series mixers, input input they should usually be connected to the mixer’s “C-R” (Control Room)
  • Seite 7: Speaker Placement

    The HS-series speakers are also an excellent choice for HS80M speakers make this easy by providing a ROOM direct connection to your electronic keyboard or other CONTROL switch that modifies the speaker’s bass electronic musical instrument. characteristics to compensate for the exaggeration caused by nearby walls.
  • Seite 8 The “Sweet Spot” For both stereo and surround mixing your position in relation to the main front speakers — the “sweet spot” as it’s often called — should be one apex of an equilateral triangle. In other words your distance from either speaker should be the same as the distance between the two speakers.
  • Seite 9 Adding a Subwoofer Even if you don’t plan to set up a surround system, adding a subwoofer can be a real advantage for stereo mixing. If you can’t hear the extreme low end there’s not much you can do to make it sound great. The extended bass response provided by a good subwoofer can indeed help you to improve the overall quality of your mixes.
  • Seite 10 If you’re connecting your HS-series speakers to a mixing console that features built-in surround handling capability — such as the Yamaha DM2000, DM1000, or 02R96 — each speaker will be OMNI Out connected directly to the console output dedicated to handling that particular surround channel.
  • Seite 11 Maintain a Consistent Fine-tuning for Surround Monitoring Level Set the HS50M or HS80M LEVEL control to about 12 o’clock to set the nominal input level to Another difference between listening and monitoring is approximately +4dB. If you’re using the HS50M that when you’re listening for enjoyment you probably set the HS10W LEVEL control to about 10 o’clock, and if you’re using the HS80M set it to about 11...
  • Seite 12: Rear Panel

    Rear Panel HS80M, HS50M +4dB " LEVEL -10dB INPUT HS80M HS50M MID EQ MID EQ +2dB +2dB +2dB MID EQ -2dB -2dB -2dB 2kHz 2kHz ROOM CONTROL ROOM CONTROL ROOM -2dB CONTROL -4dB -2dB -2dB -4dB -4dB +2dB HIGH 500Hz 500Hz TRIM &...
  • Seite 13 HS10W INPUT PHASE OUTPUT NORM. (Hz) REV. HIGH LEVEL (Hz) 80 120 80 120 " & ' LOW CUT POWER INPUT OUTPUT LOW CUT EXT SUB OUT HIGH PHASE SUBWOOFER AC IN POWER switch LOW CUT switch Turns power to the speaker on or off. When the power is If the LOW CUT switch is on, the low frequencies of the signal turned on the tuning fork mark on the front panel will light.
  • Seite 14 Specifications Model HS50M HS80M HS10W General Specifications Type Biamp 2-way Powered speaker Biamp 2-way Powered speaker Powered Subwoofer Crossover Frequency 3 kHz 2 kHz – Overall Frequency 55 Hz—20 kHz (-10 dB) 42 Hz—20 kHz (-10 dB) 30 Hz—180 Hz (-10 dB) Response 165 x 268 x 222 mm 250 x 390 x 332 mm...
  • Seite 15: Performance Graph

    HS10W 300 (11-13/16") 386 (15-3/16") Unit : mm(inch) Performance graph HS50M HS80M HS10W FREQUENCY (Hz) FREQUENCY (Hz) FREQUENCY (Hz) Block Diagram HS50M / HS80M HIGH TRIM STEP FILTER LOWCUT P.AMP INPUT 1 LOW CUT MID EQ ROOM CONTROL LEVEL INPUT 2 LOW BOOST LOW CUT STEP FILTER...
  • Seite 16 For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. CZECH REPUBLIC/SLOVAKIA/ OTHER COUNTRIES NORTH AMERICA HUNGARY/SLOVENIA Yamaha Music Gulf FZE CANADA LB21-128 Jebel Ali Freezone Yamaha Music Central Europe GmbH, P.O.Box 17328, Dubai, U.A.E.

Diese Anleitung auch für:

Hs 80mHs 50mHs 10w