Connecting Your Speakers - Yamaha NS-PLC3 Bedienungsanleitung

Connecting Your Speakers

Always turn off your amplifier or receiver before making any connections.
■ Preparing Your Speaker Cables
Carefully remove 10-15 mm of insulation from both ends of your speaker cables and twist the bare wires
tightly, as shown.
10-15 mm
Good No Good
Red (+)
Black (-)
Note: The rear panel of
various amplifires may
differ in appearance.
Notes:
• Make sure that the bare wires are not touching each other as this
could damage the speaker and amplifier.
• Connect one speaker to the left terminals of your amplifier, and
another speaker to the right terminals, making sure not to reverse
the polarity (+, –). If one speaker is connected with reversed
polarity, the sound will be unnatural and lack bass.
<NS-LC3>
Front speakers
L
R
<4m> <4m>
FRONT
R
A
B
Black
<NS-CLC3>
Center speaker
Surround speakers
R
<10m>
SPEAKERS
REAR
L R L
(SURROUND)
CENTER REAR
CENTER
<4m>
Red
<NS-ELC3>
L
<10m>
5
E-