Yamaha HTY-7030 Bedienungsanleitung Seite 664

HTY-7030
˚
QUICK REFERENCE GUIDE
This quick reference guide explains steps to connect a TV and a DVD player to this unit and achieve the
surround sound effects in a quick, easy manner. For detailed operation, refer to the Owner's Manual.
1
Installing this unit
Decide where to install this unit.
Install this unit where there are no objects such as furniture obstructing the path of sound beams. Otherwise, the desired
surround sound effects may not be achieved. You may install this unit in parallel with the wall or in the corner.
Install this unit in the exact center of the wall when it is Install this unit in the corner at a 40˚ to 50˚ angle from the
measured from the left and right corners. adjacent walls.
An object, such as furniture An object, such as furniture
40˚ to 50˚
Front left channel
Center channel
Front right channel
Surround left channel
Surround right channel
Install this unit using a rack, etc.
Depending on your installation environment, connections with external components (see "2 Connecting external components to this unit") can be done before
installing this unit. We recommend that you temporarily place and arrange all components in order to decide which procedure must come first.
install this unit on top of a rack, etc., use the supplied fasteners to prevent an accidental fall of this unit.
For further information on installation, see page 16 in the Owner's Manual.
The following is an example of installing this unit in a rack. To prevent this unit or the floor from being scratched, we recommend putting a piece of
cloth on the floor in step 2.
1 2 3
Place this unit in front of Place this unit upside Install this unit in the
the rack. down and connect this unit rack.
to your TV and DVD player.
y Hint
• To enjoy better surround effects, place this unit on the upper shelf to keep it away from the floor.
• You can also use the optional metal wall bracket (sold separately) to mount this unit on the wall. For details, refer to the instructions
supplied with the metal wall bracket.
Note
Be careful not to leave scratches on this unit or the rack.
Printed in Malaysia WK75680 [En]
2
Connecting external components to this unit
Items used for connections and operations
in this guide
s Audio pin cable (x1)
s OSD* video pin cable (x1)
Connecting external components such as a TV or DVD player to this unit.
s Optical cable (x1)
s Digital audio pin cable (x1)
Connect your TV or DVD player to this unit using appropriate cables as shown below.
s IntelliBeam microphone (x1)
wall outlet. For further information on connecting other components, see pages 19 to 29 in the Owner's Manual.
s Cardboard microphone stand (x1)
s Demonstration DVD (x1)
*OSD: On-Screen Display
This connection example shows a way to connect external components such as a TV or DVD player to
Connection
this unit by using the supplied cable.
example 1
analog/digital audio from the TV.
connection between your DVD player and TV.
TV
ANALOG AUDIO VIDEO
OUTPUT INPUT
L
R
1
Front left channel
Center channel
AUDIO INPUT OUT
Front right channel
VIDEO
Surround left channel
Surround right channel
AUX 1 TV/STB SUBWOOFER
*
The rear panel illustration shows jacks and their names to help you find them easily.
They are not exactly the same as the ones on the actual rear panel of this unit.
In case you
Connect cables in the following order.
Supplied
1 Audio pin cable
4
Installation is completed.
(Outputs TV analog audio sounds
2 OSD video pin cable
(Displays the HTY-7030 menu screen
3 Optical cable
(Outputs TV digital audio sounds
4 Digital audio pin cable
(Outputs DVD digital audio sounds
Note
Check whether the digital audio output of your TV and DVD
player is turned on.
After all connections are complete, plug the power supply cable into the AC
You can enjoy the multi-channel audio from the DVD player and the
Use the video pin cable supplied with your DVD player to make a video
DVD player
Optical cable
1. Pull out the cap
Pull out the cap
Video connection before connecting
the optical cable,
and then check the
OPTICAL
COAXIAL
2. Check the direction direction to insert the
AUDIO OUTPUT
AUDIO OUTPUT
1 cable.
2
2 3 4
DIGITAL INPUT
AUX 2 DVD
HTY-7030
COAXIAL
Subwoofer
AUX 1 TV/STB
Do not plug the power
Audio connection supply cable into an AC
wall outlet until all
connections are complete.
from this unit)
on the TV)
from this unit)
from this unit)
If you have connected external components,
follow the steps on the backside to start the
AUTO SETUP procedure.
This connection example shows a way to make the most of the capability of this unit.
Connection
enjoy DVD audio and video with higher quality via the HDMI cable.
example 2
a built-in digital satellite tuner, cable TV tuner, or digital airwave tuner, connect a digital satellite
tuner, cable TV tuner, or digital airwave tuner via the HDMI cable. For details, see "Connections
using HDMI cables" on page 21 in the Owner's manual.
TV
VIDEO HDMI
INPUT INPUT
1
2
1 2
(Sold separately)
To the AC wall
outlet
AUDIO INPUT OUT DIGITAL INPUT
AUX 2
VIDEO
COAXIAL
AUX 1 TV/STB SUBWOOFER AUX 1 TV/STB
*
The rear panel illustration shows jacks and their names to help you find them easily.
They are not exactly the same as the ones on the actual rear panel of this unit.
Connect cables in the following order.
Supplied
1 OSD video pin cable
(Displays the HTY-7030 menu screen on the TV)
y Hint
If you connect this unit to an HDMI control-compatible TV
(except some models) via HDMI, you can use the remote
control supplied with your TV to turn on or off the power,
select the audio output component, and adjust the volume
level of this unit.
Continued
on the back Note
Check whether the digital audio output of your TV and DVD
player is turned on.
You can
In case your TV does not have
Digital satellite tuner/Cable TV tuner/
DVD player
Digital airwave tuner
HDMI
HDMI connection
OUTPUT
AUX 1
3
(Sold separately)
DVD
IN
OUT
HDMI
To the AC wall
DVD
HTY-7030
outlet
Subwoofer
Do not plug the power
Audio connection
supply cable into an AC
wall outlet until all
connections are complete.
Sold separately
2 HDMI cable
(Displays the DVD digital video on the TV)
3 HDMI cable
(Inputs DVD digital audio/video signals to this unit)
If you have connected external components,
follow the steps on the backside to start the
Continued
on the back
AUTO SETUP procedure.
C2007 All rights reserved.