Factory Settings - WIKA CPH6600 Betriebsanleitung

6. Commissioning, operation

6.5 Factory settings

The calibrator is delivered with five commonly-used factory settings.
These settings are shown below.
GB
Any of these settings can be changed and saved by the user.
Setting 1:
The upper display is set to [P1] mode and the lower is set to "mA"; the middle is off.
Setting 2:
The upper display is set to [P1] mode and the lower is set to "RTD"; the middle is off.
WIKA operating instructions, model CPH6600 25