WIKA CPH6600 Betriebsanleitung Seite 18

6. Commissioning, operation
6.1.1 Main display functionality
There are three options for this menu: "MENU", {active display}, and "LIGHT".
GB
6.1.1.1 Using the "MENU" option
The "MENU" option is entry to the rest of the menu system.
6.1.1.2 Using the {active display} option
The {active display} is displayed via the middle option in the menu in the main display.
It is used to select which display on the screen, for example, the ZERO key will be used
for.
6.1.1.3 Using the "LIGHT" option
The backlight can be toggled on and off using this key.
6.1.2 Main menu Functionality
There are three options on the menu, "CONFIG", {active display} and "MORE". The
main menu is the 'home' for the menu display.
6.1.2.1 Setting the {active display}
The {active display} is displayed via the middle option in the menu in the main display.
Pressing the F2 key switches between the {active display}.
6.1.2.2 Setting the {active display} parameters
In order to set the {active display} parameters, select the "CONFIG" option and open
the configuration menu.
Here the "SELECT" option will switch between the available choices for each
parameter. The first parameter is "MODE". Since voltage, current and switch test modes
all use the same leads, two of these functions cannot be used concurrently. The ability
18 WIKA operating instructions, model CPH6600