Cleaning And Replacing The Exhaust Filter - Philips HomeRun FC9910 Benutzerhandbuch

Turn the mesh filter (1). Clean the mesh of
3
the filter with the brush side of the cleaning
tool (2).
1
Put the mesh filter back into the filter holder
4
with the black rubber seal pointing away from
the filter holder.
Reattach the filter holder to the dust
5
container (1).
Follow steps 7 to 9 in section 'Emptying the
6
dust container' to place the dust container
back into the robot (2) and to place the dust
container compartment cover back onto the
robot.
1
7.3 Cleaning and replacing
the exhaust filter
7.3.1 Cleaning the exhaust filter
You have to clean the exhaust filter every month
2
if you use your homeRun daily.
Follow steps 1 and 2 in section 'Cleaning the
1
mesh filter' to remove the mesh filter from
the dust container.
Remove the exhaust filter (1) and clean it
2
with a regular vacuum cleaner (2).
Note:
D
The exhaust filter is not dishwasher-proof and
not waterproof.
Put the exhaust filter back into the filter
3
holder with the white side pointing towards
the filter holder.
Follow steps 4, 5 and 6 in section 'Cleaning
4
the mesh filter' to put back the mesh filter, to
reattach the filter holder and to put the dust
container back into the robot.
7.3.2 Replacing the exhaust filter
The exhaust filter needs to be replaced every six
2
months if you use your homeRun daily.
Follow steps 1 and 2 in section 'Cleaning the
1
mesh filter' to remove the mesh filter from
the dust container (1).
Insert a new exhaust filter into the filter
2
holder with the white side pointing towards
the filter holder (2).
1 2
23