Cleaning And Replacing The Exhaust Filter; Cleaning The Exhaust Filter; Cleaning The Motor Protection Filter - Philips FC9910 Handbuch

English
28

Cleaning and replacing the exhaust filter

Cleaning the exhaust filter

You have to clean the exhaust filter every month if you use the robot
vacuum cleaner daily.
1 Follow steps 1 to 4 in section 'Cleaning the mesh filter' to remove
the mesh filter from the dust container.
2 Remove the exhaust filter and clean it with a regular vacuum cleaner.
Note: The exhaust filter is not dishwasher-proof and not waterproof.
3 Put the exhaust filter back into the filter holder with the white side
pointing towards the filter holder.
4 Follow steps 6 to 8 in section 'Cleaning the mesh filter' to put back
the mesh filter, to reattach the filter holder and to put the dust
container back into the appliance.
replacing the exhaust filter
The exhaust filter needs to be replaced every 6 months if the robot
vacuum cleaner is used daily.
1 Follow steps 1 to 4 in section 'Cleaning the mesh filter' to remove
the mesh filter from the dust container.
2 Insert a new exhaust filter into the filter holder with the white side
pointing towards the filter holder.
3 Follow steps 6 to 8 in section 'Cleaning the mesh filter' to put back
the mesh filter, to reattach the filter holder and to put the dust
container back into the appliance.

Cleaning the motor protection filter

Check the motor protection filter every six months. Clean the filter if it is
dirty
1 Follow steps 1 and 2 in section 'Emptying the dust container' to
remove the dust container compartment cover and take out the
dust container.
2 Remove the motor protection filter from the appliance and clean it
with a regular vacuum cleaner.
3 Place the motor protection filter back.
4 Follow steps 8 and 9 in section 'Emptying the dust container' to place
the dust container back into the appliance and the dust container
compartment cover back onto the appliance.