Notes.on.safety; Symbols Used On The Instructions; Symbols Used On The Saw - FLORABEST FKS 2200 B1 Originalbetriebsanleitung

Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
. Warning:.
emission value may differ during
actual use of the power tool from
the stated value depending on the
manner in which the power tool is
used.
Safety precautions aimed at protect-
ing the user should be based on esti-
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
Notes on safety
This section deals with the basic safety
regulations while working with the electric
chainsaw.
The vibration
An electric chainsaw is a danger-
ous device, which can cause seri-
ous or even fatal injuries with incor-
rect or careless use. Thus, for your
own safety and the safety of others,
you should always take note of the
instructions on safety and, in case
of difficulties, consult a specialist for
advice.
Symbols used in the instruc-
tions
. Hazard.symbols.with.in-
formation.on.prevention.of.
personal.injury.and.property.
damage..
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.

Symbols used on the saw

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and sawing techniques by
a practiced user or specialist.
Read and take note of the operat-
ing manual belonging to the ma-
chine!
Wear personal protective equip-
ment. Basically, wear protective
goggles or, even better, face protec-
tion, ear protection, safety helmet,
cut-protection working clothes, cut-
GB
51