AEG KS7415001M Installationsanleitung Seite 5

This oven is exclusively for domestic use!
The appliance is designed for use in the home for preparing food. No liability
is assumed for any damage caused by improper or incorrect use.
Avoid damaging the oven or other dangerous situations by following these
instructions:
• Do not cover or obstruct the ventilation openings.
• Do not keep any inflammable object inside the oven as it may burn if the
oven is switched on.
• Do not use the oven as a pantry.
• Do not pour spirits (e.g. brandy, whisky, schnapps, etc.) over hot food.
Danger of explosion!
• Accessories such as Wire shelfs and trays, etc. get hot in the cooking
space. Always wear protective gloves or use oven cloths.
• To avoid being burnt, always use oven gloves for handling dishes and
containers and touching the oven.
• Do not lean or sit on the open oven door. This may damage the oven,
especially in the hinge zone. The door can bear a maximum weight of 8
kg.
• The Wire shelfs can bear a maximum load of 8 kg. To avoid damaging the
oven, do not exceed this load.
Cleaning:
• The appliance will remain hot for some time after it is switched off and cool
down only slowly to room temperature. Please allow sufficient time for the
appliance to cool down before, for instance, cleaning it.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
oven door glass since they can scratch the surface, which may result in
shattering of the glass.
• The door contact surfaces (the front of the cooking space and the inside
part of the door) must be kept very clean in order to ensure the oven
functions correctly.
• Please follow the instructions regarding cleaning in the section "Oven
Cleaning and Maintenance".
Repairs:
• If the power cable is damaged it should be substituted by the
manufacturer, authorised agents or technicians qualified for this task in
order to avoid dangerous situations. Furthermore, special tools are
required for this task.
Repair and maintenance work, especially of current carrying parts, can only
be carried out by technicians authorised by the manufacturer.
Safety Instrcutions
6