AEG KS7415001M Installationsanleitung Seite 37

Care and Maintenance
34
Replacing the light bulb
To replace the light bulb, proceed as follows:
• Disconnect the oven from the power supply. Take the plug out of the
socket or switch off the oven's power circuit.
• Unscrew and remove the glass light cover.
• Remove the light bulb. Warning! The bulb may be very hot.
• Fit a new G9 250V/25W bulb. Follow the lamp manufacturer's instructions.
• Screw the glass light cover into place.
• Connect the oven again to the power supply.
Importante Note:
The glass light cover has a rubber gasket to prevent the
steam from entering in contact with the lamp. Please
make sure the gasket is in the correct position before
screwing the glass light cover in position.