Change Engine Oil; Clean Air Filter; Clean Spark Plug - Zipper ZI-RAM80V Betriebsanleitung

14.1

Change engine oil

Change engine oil after the first 20 hours of op-

eration.
Later change it every 200 hours

Best time for engine oil change is approx. 15

minutes after a longer operation, the oil should
be lube warm then.
To drain the old oil, first unfasten the oil drain

plug at the bottom side of the engine assembly.
When draining the old oil, catch it in a bin.

Fill in the new engine oil

Dispose of the old oil in an environmentally

friendly way!
14.2

Clean air filter

A polluted air filter makes it very hard to start the engine, it im-
pairs the engine output and leads to engine malfunctions.
It shortens the engines lifespan and in extreme cases it can ruin
the engine within short time.
So take care to have your air filter kept clean at every time!
To clean the air filter, unfasten the wing nut, remove the air filter
cap, remove the froth mantle and the air filter.
Clean both mechanically (with a brush).
Wipe both thoroughly with a solvent composed of 3 parts diesel and one part motor oil.
Drain motor oil onto the filter, remove excessive motor oil by wringing it out.
14.3

Clean spark plug

Remove the spark plug and clean it with
a brush from debris. The contact should
be 0,6-0,7mm.
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
Vibrationsstampfer / Vibrating tamper / Pison vibrador / Pilonneuse ZI-RAM80Vite 30
MAINTENANCE
SYMBOLIC
PICTURE
Seite 30