Benning IT 120 B Kurzanleitung Seite 18

Measurements
3. Measurements
3.1 Illumination
 Set function
c Correct LUXmeter probe positioning
d Switch on LUXmeter probe (ON/OFF key)
Press the key to start.
Press the key again to stop measurement.
e View results and press the MEM key to save them.
Displayed results:
E: Illumination
b Set parameters and limits
- Low limit illumination value
[* lux sets limit off, 0.1 - 20.0
klux]
BENNING Luxmeter Typ B, item no. 044111 (Option)
18
Illumination
