Electromagnetic Fields (Emf); Machine Overview (Fig. 1) - Saeco Intelia Deluxe HD8906 Bedienungsanleitung

Electromagnetic fields (EMF)

Machine overview (Fig. 1)

- Only put roasted coffee beans in the bean hopper. If ground coffee,
instant coffee, raw coffee beans or any other substance is put in the
coffee bean hopper, it may cause damage to the machine.
- Let the machine cool down before inserting or removing any parts. The
heating surfaces may retain residual heat after use.
- Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the machine.
- Never use souring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the machine. Simply use a soft cloth
dampened with water.
- Descale your machine regularly. The machine indicates when descaling is
needed. Not doing this will make your appliance stop working properly.
In this case repair is not covered under your guarantee.
- Do not keep the machine at temperatures below 0°C.Water left in the
heating system may freeze and cause damage.
- Do not leave water in the water tank when the machine is not used over
a long period of time. The water can be contaminated. Use fresh water
every time you use the machine.
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
1 Lid of the bean hopper
2 Coffee bean hopper
3 Socket for cord
4 Water tank
5 Pre-ground coffee compartment
6 Grinder adjustment knob
7 Control panel
8 Coffee grounds container
9 Coffee dispensing spout
10 Drip tray
11 Drip tray cover
12 Drip tray full indicator
13 ESPRESSO button
14 ESPRESSO LUNGO button
15 AROMA STRENGTH button
16 CARAFE QUICK CLEAN button
17 Standby button
18 MENU button
19 SPECIAL DRINKS button
20 MILK FROTH button
21 CAPPUCCINO button
22 Cord
23 Cleaning brush (for specific types only)
24 Grease (for specific types only)
25 Pre-ground coffee measuring spoon
26 Water hardness tester
27 Coffee residues drawer
English
7