Turning Handset On/Off; Choosing The Dial Mode - comfortel DECT 650C Bedienungsanleitung

Turning Handset On/Off

When you place the handset on the charger, it automatically turns on.
To turn the handset on (when it's off), keep the end/on/off key
display on. Symbols of display are stated in
To turn the handset off, keep the end/on/off key
appears. Then the display turns off.
Nothing will appear on the display when the battery power is very low. You should fully charge the
handset before using it.
The first time the phone turns on, the display shows the handset and the base number, e.g. HS(1)
and BS(1). You can choose to assign a name to the handset, to change the language and to set
the date, time and other parameters. For further details please see
on page 126,
chapter Setting Date & Time on page

Choosing the Dial Mode

In order to provide compatibility with other telephone systems, your phone can be set to either pulse
dialing (rotary), or tone dialing (DTMF). Your phone is preset to the tone dialing, anyway if you are
not sure which dialing requires your telephone network please contact your local service provider.
To change the dialing mode:
N
chapter Selecting a Language on page
3.Setting
8.Dial Mode
BS Pin
****
Select Mode
TONE
chapter Meaning of the Main Icons on page
pressed until the Good bye message
126, chapter Setting Display on page 127
92.
MENU
Press the MENU soft key to display the main
menu items.
SELECT
Press the navigation keys to choose 3.Setting,
and press the SELECT soft key.
Press repeatedly the navigation keys to
SELECT
choose 8.Dial Mode, and press the SELECT
soft key. The display asks you to enter the
Base PIN (identification code).
Enter the base PIN (preset at the factory to
SELECT
0000) and press the SELECT soft key. The cur-
rent setting appears.
Press the navigation keys to choose TONE or
SELECT
PULSE, then press the SELECT soft key to
save the selection.
Press the end/on/off key to return to Standby
mode (waiting for incoming calls).
Getting started
pressed until you switch the
chapter Setting a Handset Name
91
82.
and