Setting The Dial Mode; Barring Outgoing Calls; Dial Mode (Ref; Call Bar - comfortel DECT 650C Bedienungsanleitung

132

Setting the Dial Mode

N
We recommend to contact your service provider or refer to your PABX user's manual in order to
know the proper flash time to use with your telephone network.
Setting the Dial Mode
This setting is important to allow you the compatibility with the telephone network you are using by
setting it to pulse dialing (rotary), or tone dialing (DTMF).
For details on how to set the Dial Mode (which is under the Setting menu), please see
Choosing the Dial Mode on page

Barring Outgoing Calls

You can set the phone to restrict numbers that can be dialed. Calls beginning with the numbers you
specify using this menu can not be dialed. You can set up to 4 different restricted numbers contain-
ing up to 4 digits each.
To activate or deactivate a call barring number:
N
BS Pin
****
Select Number
300 ms
91.
3.Setting

9.Call Bar

BS Pin
****
Select Mode
BAR 2
Enter the current base PIN (preset to 0000) to
SELECT
access the Setting menu, and press the
SELECT soft key.
The display shows the current setting.
Press repeatedly the navigation keys to
choose the desired flash time, then press the
SELECT
SELECT soft key. You can choose from 80,
100, 120, 180, 250, 300 (default), 500 or
600 ms.
To to return to Standby mode, press the end/
on/off key.
MENU
Press the MENU soft key to display the main
menu items.
Press repeatedly the navigation keys to
SELECT
choose 3.Setting, then press the SELECT soft
key.
Press repeatedly the navigation keys to
SELECT
choose 9.Call Bar, then press the SELECT soft
key.
Enter the current base PIN (preset to 0000) to
SELECT
access the Call Bar menu, and press the
SELECT soft key.
Press repeatedly the navigation keys to
SELECT
choose the barring memory location, and press
the SELECT soft key.
chapter