Herunterladen Diese Seite drucken

Message Transmission - comfortel DECT 650C Bedienungsanleitung

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

N
0170333444
To shift the case, press the # key while entering text. For details about entering the text please see
chapter Entering a Name on page
If you have an incoming call while creating a message, you can retrieve the message after answer-
ing the call. When you access the 1.Write option, if there is an unsent message the display shows
Want to edit your last message?. You can choose Yes to finish writing the message and send it.
To cancel, select No, you will be prompted to write a new message.
In some countries, you can send SMS messages to fixed line phones even if they are not fitted with
SMS capability. If your network operator fitted the line with the SMS-to-voice conversion, the mes-
sages are delivered and "read" to the addressee ad voice mail. Please contact your network oper-
ator for more details.

Message Transmission

When the message is being sent, the display shows Sending SMS and then shows Success! or
Fail! according to the sending result.
When the sending is successful, the display shows Save Message?. Use the down or up naviga-
tion keys to highlight Yes to save the message in the outbox or No if you don't want to save it.
If the sending fails, the display shows Fail! and than the following options:
Transmit Again - retries to send the message.
Save Message - saves the message in the Draft
Enter Number
1.Send
At this step:
If you previously selected Enter Number,
enter the phone number to whom you want
to send the message by using the keypad.
OK
If
Number, use the navigation keys to select
1.Dialed Call, 2.Received Call or 3.Phone-
book and press the SELECT soft key, then
select the number from the selected list by
using the navigation keys.
Press the OK soft key to confirm.
Press repeatedly the navigation keys to
choose the operation you want to do with the
SMS message you have just typed:
1.Send - sends the message immediately to
the selected destination as described in
chapter
SELECT
page
2.Save Only - saves the message in the
Draft folder without sending it. Saving SMS
will appear on the display and the message
will be saved in the Draft folder.
Press SELECT soft key to confirm the selected
operation.
If necessary, press the end/on/off key to return
to Standby mode.
108.
SMS - Short Message Service
you
previously
selected
Message
Transmission
119.
119
2.Search
on

Werbung

loading