Resetting The Handset Or The Base; Reset (Ref - comfortel DECT 650C Bedienungsanleitung

Resetting the Handset or the Base

If you reset the handset or the base, all the user selectable features restores to the factory preset
initial settings: all the numbers in phonebook will be erased, as well as the incoming/outgoing call
lists etc. You can reset the handset without resetting the base or vice versa, it depends on the scope
you have. It is mainly useful for these purposes:
If you have made many wrong settings and you want to restore the handset to the factory preset
initial settings.
If the phone shows logical malfunctions (not correct symbols on the display, incorrect behaviour
etc.), the problem can be caused by an AC power supply noise or an electrostatic spike which
can temporarily alter the memory of the internal microprocessor. In this case the reset could
solve the problem.
To activate the reset:
N
Be careful! When you reset the handset you will loose any data stored in it (e.g. name and numbers
in phonebook). Don't forget to note them down before resetting the handset.
Resetting the base does not affect the handsets registered to the base.
4.Advanced
2.Reset
2.BS Reset
BS Pin
****
Confirm?
MENU
Press the MENU soft key to display the main
menu items.
Press repeatedly the navigation keys to
SELECT
choose 4.Advanced, then press the SELECT
soft key.
Press repeatedly the navigation keys to
SELECT
choose 2.Reset, then press the SELECT soft
key.
Your phone asks you to choose between Hand-
set Reset (HS Reset) or Base Reset (BS
SELECT
Reset). Press the navigation keys to choose
and confirm the selection by pressing the
SELECT soft key.
Depending on the choose you did in step 3,
SELECT
enter either the Handset PIN or the Base PIN
and press the SELECT soft key.
The display prompts you to confirm the reset
SELECT
with the message Confirm?
Press the SELECT soft key to confirm and
reset either the Handset or the Base.
To return to Standby mode, press the end/on/
off key.
135
Advanced