Deactivating A Handset; Release Hs (Ref - comfortel DECT 650C Bedienungsanleitung

N
If you have more than one COMfortel DECT 650C, a handset can be registered to up to 4 different
base units in order to extend the radio coverage. A base can be used with up to 4 handsets in total.
Obviously the base can be accessed by one handset a time (because a base is connected to one
line).

Deactivating a Handset

If necessary, you can clear the registration of a registered handset in order to stop its access to one
or more base units. Just follow these steps:
N
N
AC CODE
****
Base 1
HS(2) BS(1)
4.Advanced
5.Release HS
BS Pin
****
1 3
UNREGISTERED
After the HS PIN, the display asks you to enter
SELECT
the base PIN code (preset to 0000) which acts
as phone's authentication code (AC). Enter this
code and press the SELECT soft key.
Press repeatedly the down or up navigation
SELECT
key to choose the base number you want. Press
the SELECT soft key in order to search the
base. The display shows Searching.
Keep pressed the Paging key located in the
bottom of the base you want to register.
If the registration has performed successfully,
the new handset will show the phone and base
numbers (e.g. HS(2) BS(1)) and returns in
Standby mode. You can now release the Pag-
ing key.
MENU
Press the MENU soft key to display the main
menu items.
Press repeatedly the navigation keys to
SELECT
choose 4.Advanced, then press the SELECT
soft key.
Press repeatedly the navigation keys to
SELECT
choose 5.Release HS, then press the SELECT
soft key.
Enter the current base PIN and press the
SELECT
SELECT soft key. The display shows all the
handsets currently registered to the base.
Press the numeric key(s) related to the hand-
SELECT
set(s) number(s) you want to clear the registra-
tion, then press the SELECT soft key.
The display of the handset(s) which you have
cleared the registration show(s) UNREGIS-
TERED and they cannot be used any more with
the base.
137
Advanced