Digital Out - Yamaha DSP-A2 Bedienungsanleitung

PREPARATION
Connecting to DOLBY DIGITAL RF output of the DVD/LD/CD combi-player
If your DVD/LD/CD combi-player has a DOLBY DIGITAL RF
signal output terminal, connect it to this unit's
SIGNAL input terminal. Audio signals of an LD source encoded
with the Dolby Digital are input to this unit by this connection.
* To play back an LD source with the Dolby Digital decoded,
set the input mode of DVD/LD to "AUTO" or "D.D.RF".
(Refer to page 35 for details.)
It is also necessary to connect the DVD/LD/CD combi-player to
this unit's analog audio signal input terminals regardless of the
DOLBY DIGITAL RF signal connection. This is for playing back
a source with Dolby Pro Logic Surround decoded or in normal
stereo (or monaural).
18
DIGITAL RF
DVD/LD/CD
combi-player
DOLBY DIGITAL
RF OUT
GND AUDIO SIGNAL
PHONO
DIGITAL
RF SIGNAL 1
DVD/LD
CD
3
CD
IN
COAXIAL
( PLAY )
TAPE/MD
OPTICAL
4
CD
OUT
( REC )
MAIN
IN
(PLAY)
SURROUND
TAPE/MD
OUT
(REC)
DVD/LD
SUB WOOFER
EXTERNAL DECODER INPUT
TV/DBS
DIGITAL SIGNAL
You must also connect the optical digital signal output terminal
of the DVD/LD/CD combi-player to the OPTICAL DVD/LD
digital signal input terminal of this unit.
This connection is necessary for playing back a DVD source
with Dolby Digital or DTS decoded, and playing back an LD
source with DTS decoded.
Note
DOLBY DIGITAL RF audio input signal cannot be recorded by
a tape deck, MD recorder or VCR. To record a source played
back on the DVD/LD/CD combi-player, it must be connected to
the OPTICAL digital audio signal input terminal and analog
audio signal input terminals of this unit.

DIGITAL OUT

(Europe model)
AUDIO SIGNAL
DVD/LD
TV/DBS
IN
VCR 1
OUT
IN
VCR 2
OUT
2
TUNER
CENTER