Sharp XV-Z2000 Anleitung Seite 45

Checking RS-232C
Communication is disabled even though
connecting the control PC and projector
with a RS-232C cable.
Is the connecting cable connected
correctly? (cross cable)
YES
Is there any signal at pin (8) of IC8002?
YES
Is there any signal at pin (106) of IC2201?
YES
Check IC2002 and its peripheral circuits.
NO
Replace the connecting cable.
NO
Check SC3501, R2039 and their peripheral circuits.
NO
Check IC2006 and its peripheral circuits.
45
XV-Z2000
DT-400