Remote Control - Sharp XV-Z2000 Anleitung

Remote Control

STANDBY button
Put the projector into standby
mode.
KEYSTONE button
Enter the Keystone
Correction mode.
ENTER button
Set items selected or
adjusted on the menu.
UNDO button
Undo an operation or returning to
the previous display.
INPUT 1 button
INPUT 2 button
INPUT 4 button
AUTO SYNC button
Automatically adjust images when
connected to a computer.
RGB/COMP. button
Switch the signal type
(RGB or Component).
IRIS button
Switch "HIGH BRIGHTNESS
MODE" or "HIGH CONTRAST
MODE".
Note
• All the buttons on the remote control are made of luminous material that is visible in the dark. Visibility will
diminish over time. Exposure to light will recharge the luminous buttons.
ON button
Turn the power on.
MENU button
Display adjustment and setting
screens.
Adjustment buttons
('/"/\/|)
ZOOM/FOCUS button
Adjust the projected image
size or adjusting the focus.
INPUT 3 button
DIGITAL INPUT button
INPUT 5 button
RESIZE button
Switch the picture display
(STRETCH, SIDE BAR, etc.).
PICTURE MODE button
Select the picture setting (Memory)
stored in "Picture Mode" on the
"Picture" menu.
13
XV-Z2000
DT-400