Sharp XV-Z2000 Anleitung Seite 42

XV-Z2000
DT-400
Checking the SOG Circuit
Measure the pin (7) of IC5001
with an oscilloscope.
Is the composite synchronized
signal regenerated at proper timing?
NO
Measure the pin (2) of Q5001
with an oscilloscope.
Is there the Y signal including sync
signal?
YES
This is the failure of the SOG
synchronization separator circuit.
YES
The SOG circuit is normal.
End.
NO
Is there any output from the pin
(25) of IC3102?
YES
42
NO
Check Q3110 and its
peripheral circuits.