Driver Installation Of Usb Interface - piezosystemjena d-Drive Bedienungsanleitung

115200 baud, 8 bit, no parity, 1 stop bit, Xon/Xoff handshake
All commands and responses of the system are encoded in ASCII-code, enabling easy reading
and writing.

8.5.2 driver installation of USB interface

Two drivers are necessary to use the device. The first is responsible for the USB connection
between PC and digital amplifier unit, the second is responsible for communication by the RS232
(COM) interface.
driver installation:
Please, first install the Bus driver FTDIBUS.inf and then the COM port driver FTDIPORT.inf. The
following example shows the installation procedure with Windows XP:
Please connect the PC and the d-Drive via the supplied USB cable and then turn on the system.
The device is then identified.
Geschäftsführer: Dr. Bernt Götz • Telefon 03641/66880 • Fax 03641/668866 • www.piezojena.com
63