Technical Data; Remote Control Instructions; Control Commands - KERN CFS Betriebsanleitung

16.1 Technical Data

Connector 9 pin d-sub bushing
Pin 2 output
Pin 3 input
Pin 5 signal earth
Baud rate 600/1200/2400/4800/9600
Parity
8 bits, no parity / 7 bits, even parity / 7 bits, odd parity
bold printed = factory setting

16.2 Remote control instructions

All inputs finish with <CR><LF> (carriage return / line feed).
At wrong inputs the command will be preceded by "ER", e.g. order "NN<CR><LF>",
error message "ER NN<CR><LF>".

16.2.1 Control commands

PLU
xx
T
T123.456
Z
P
M+
MR
MC
U123.456
S123
SL
SR
46
Call-up PLU from data memory
Tare placed weighing vessel
Numeric tare value
Zeroing
Print
Add and print weighing data in the summation memory
Call-up data from memory
Delete memory
Save the average piece weight 123.456 [g] or [lb]
Input number of pieces e.g. 123 pieces
Reference balance
Bulk material balance
CFS/CCS-BA-e-1215