6.3.2
Counting system
Bulk material balance KERN KFP
In factory the counting system KERN CCS is preconfigured in a way that no
more changes will be necessary.
When connecting a weighing bridge (not preconfigured by KERN) the follow-
ing must be observed:
Connect weighing bridge with a suitable cable via the second-balance
interface.
Allocation of the interface connection see chapter 14.
Configure weighing bridge, see chapter 13
Adjust balance / weighing bridge, see chapter 7.2
6.3.3
Scope of delivery / serial accessories
KERN CFS
Balance see chpt. 6.2.1)
Power cable
Protective cover
Operating Manual
CFS/CCS-BA-e-1215
KERN CCS
Reference balance KERN CFS
KERN CCS
Ref. balance KERN CFS, see chap. 6.2.1
Bulk mat. balance KERN CFS, see chap. 6.2.2
Operating instructions KERN CFS/CCS
Operating instructions KERN KFP
13