Weighing With Tare; Taring - KERN CFS Betriebsanleitung

By pressing the display changes from one to the other balance.
In the display appears
The appeared [] displays the current balance.

9.4 Weighing with tare

A tare value can be entered for the reference as well as for the bulk material bal-
ance. Before setting a tare value select an active balance,
see chpt 8.3
9.4.1

Taring

 Deposit weighing vessel. After successful stop check press the TARE button.
The zero display and the [] symbol over NET will appear.
The weight of the container is now internally saved.
 Weigh the material, the net weight will be indicated.
 The weight of the weighing container will be displayed as a minus number after
removing the weighing container.
 To delete the tare value, remove load from weighing pan and press the TARE-
key.
 The tare procedure can be repeated as many times as necessary, for example
with initial weighing of several components for a mix (add-on weighing). The limit
is reached when the total weighing range capacity is full.
24
or
(1)
Reference balance KERN
CFS
(2)
Bulk material balance KERN
KFP (counting system
CCS)
CFS/CCS-BA-e-1215
.