Tolerance Control In Counting Mode - KERN CFS Betriebsanleitung

Display of tolerance mark , if weighing goods within the specified tolerance:
Display of tolerance mark , if weighing goods above the specified tolerance:
The indetermination if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „
 For tolerance control, just one limit value can be set.
 If both limit values are deleted, the tolerance control is deactivated.

12.2 Tolerance control in counting mode

 Press
, the active tolerance weighing mode is
indicated.
 If necessary, with
mode" select [
 Press
, the currently set upper limit value is dis-
played.
 Using numeric keyboard enter desired value e.g. 50
items or delete using
 Press
, the currently set lower limit value is dis-
played.
 Using numeric keyboard enter desired value e.g. 40
items or delete using
CFS/CCS-BA-e-1215
Operation
"Tolerance control weighing
]
.
.
„ see chpt. 12.2)
Display


33