6.4.3
Display quantity
Here the current piece quantity (PCS = pieces) or in totalizing mode the sum
Sum of the placed parts is displayed, see chapter 9.
The arrows [] above the symbols show:
Tolerance control in counting mode
Tolerance control in weighing mode
+
Goods to be weighed above tolerance limit
Goods to be weighed within tolerance range
TOL
-
Goods to be weighed below tolerance limit
6.5 Keyboard overview
Choice
Function in Weighing mode
.....
CFS/CCS-BA-e-1215
Numeric keys
Decimal point
At numeric input number
selection to the left
Delete key
Function in Menu
15