Vari BDR-1200 Bedienungsanleitung Seite 32

Position: STOP
Engine is not running (position '1')
Used for turning off the running engine.
Machine shutdown
Refuelling
Machine transport
Position MAX:
Engine is running at maximum rpm. (position '3'
hare)
Operating position
Fig. 9: Accelerator lever positions
1) Punch mark
2) Uncut stand
Fig. 10: Cutting width – punch mark
1) Left handlebar handle
2) Wheel drive clutch lever
3) Gear shifting lever
4) Arrow
5) Gear scale
Fig. 11: Gear shifting lever
1) Upper transmission cover
2) Wheel drive pulley adjustment screw
3) Disc drive pulley adjustment screw
4) Automatic brake adjustment screw
5) Gear shifting Bowden cable
Fig. 12: Tightening pulleys adjustment screws
1) Driving pulley on engine
2) Double pulley
3) Driven pulley of left cutting disc
4) Tension pulley of the cutting disc drive.
5) Belt tensioner
6) Cutting discs wheel drive belt
7) Left gearbox drive belt
8) Disc brake cam
9) Automatic brake cable
10) Belt gas strut
11) Automatic brake spring
12) V-belts manual pins
13) Tensioner arm support
14) Cutting mechanism connecting plate
Fig. 13: Cutting disc drive - belts
1) Wheel drive automatic brake cable
2) Brake lever
3) Adjustment nut
4) Brake spring
5) Adjustment screw of the wheel drive automatic brake
6) Wheel drive clutch lever
Fig. 14: Adjustment of wheel drive automatic brake
Fig. 15: Adjustment screw of the wheel drive automatic brake
Position MIN:
Engine is running at idle. (position '2' turtle)
Short work break
Position CHOKE:
Engine is running with the choke on. (position '4')
Cold engine sta
BDR-1200
32