Yamaha DVX-1000 Bedienungsanleitung Seite 15

Connecting the DVD receiver and the
subwoofer
Connect the subwoofer to the DVD receiver using the
system control cable. Attach one end to the subwoofer and
the other to the SYSTEM CONNECTOR terminal at the
rear of the DVD receiver.
Y
AUX IN LINE OUT
SYSTEM DIGITAL IN VIDEO
P B
CONNECTOR OPTICAL L L
MAINS AV MONITOR OUT (DVD ONLY)
VIDEO OUT
TO SUBWOOFER (DVD ONLY)
R R P R
S VIDEO
q DIGITAL PCM/DTS AUDIO COMPONENT HDMI
SYSTEM
CONNECTOR
Notes
– When connecting the system control cable, be sure
to insert the plug until it clicks. When
disconnecting the system control cable, slide the
collar of the plug back to unlock.
– Ensure that the speaker cables are correctly
connected. Improper connections may damage the
system due to a short-circuit.
– When connecting the speakers, fix the speaker
cables in place so that cables do not loosen. If your
foot or hand accidentally gets caught on a loose
speaker cable, the speaker may fall.
– To prevent unwanted noise, do not place the
subwoofer too close to the DVD receiver, AC
power adaptor, TV or other sources of radiation.
– Be sure to connect the power cable of the
subwoofer (NX-SW1000) to the AC outlet before
you turn on the DVD receiver (DVR-1000).
Otherwise, the subwoofer (NX-SW1000) will not
be powered correctly.
TUNER
FM GND
AM
ANT
75Ω UNBAL ANT
SPEAKERS
R L
R L
SYSTEM
CONNECTOR SYSTEM
CONNECTOR
6Ω MIN. /SPEAKER
MAINS
NX-SW1000
System connections
2
13
En