Benning CM P1 Bedienungsanleitung Seite 13

TRUE RMS Digital Current Clamp Meter for
- AC current measurement (BENNING CM P1)
- AC/ DC current measurement (BENNING CM P2)
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Ambient conditions
7. Electrical specifications
8. Measuring with the BENNING CM P1/ P2
9. Maintenance
10. Environmental note
1. User notes
These operating instructions are intended for
- qualified electricians and
- electrotechnically trained persons.
The BENNING CM P1/ P2 is intended for making measurements in dry environment. It must
not be used in power circuits with a nominal voltage higher than CAT III 600 V (More details in
Section 6. "Ambient conditions").
The following symbols are used in these operating instructions and on the BENNING CM P1/ P2:
Application around and removal from HAZARDOUS LIVE conductors is permitted.

This symbol indicates an electrical hazard.

This symbol indicates sources of danger when using the BENNING CM P1/ P2
(see documentation).

This symbol on the BENNING CM P1/ P2 indicates that the unit is protection
insulated (safety class II).
This symbol appears in the display for a discharged battery
DC voltage or current

AC current or voltage

Earth (voltage to earth)
03/ 2018
Operating manual
BENNING CM P1/ P2
BENNING CM P1/ P2

13